The BEST General Purpose Rifle for the money.
The Ready Rifle fills the ever growing hole in the market for a quality, robust, simple, handy general purpose rifle/carbine at an approachable price point for any sensible, responsible prepared civilian, LEO Officer/Agency and Armed Professional, that values cost to performance.
The Goal: Make the best rifle, REFINED for modern application not just copying what is Mil-Spec while remaining to its standards for durability and parts quality. Focused on flexible general purpose use to an uncompromising quality standard, for no more than $1000. Choosing optimal parts and technical specifications to optimize this rifle into a weapon system READY to perform highly in all tasks expected of a GPR, Duty Rifle, Patrol Rifle Etc.
Any Time, Any Where, Always Ready.
Unloaded Weight: 5.5Lbs
*Upper receivers and lower receivers available to purchase individually under Uppers and Lowers on the website.
Ready Rifle (RR-15)
-RIFLE CONFIGURATION-
For those who want the Ready Rifle as a legal rifle for simplicity/ease of travel or due to local laws and restrictions this configuration was the original design with the muzzle device pin & welded to the barrel allowing it to be counted to the overall barrel length requirements to legally be classified as a rifle. We also weld the gas block set screws as well to add robustness to the gas system.
-A2 Muzzle device P&W to meet Overall length requirements for legal Rifle identification (14.7"+1.3" + 16" OAL)
-Welded gas block screws
-Meets federal legal rifle definition and is classified / sold as such.
-PISTOL CONFIGURATION-
Pistol configuration has the Magpul MOE butt stock replaced with a Magpul BSL pistol brace and no pin and weld applied to the muzzle device as well as the gas block.
-NO Pin and Weld of the muzzle device
-NO Welding of the gas block set screws
-Pistol Brace installed instead of butt stock
-Sold as a pistol
-PISTOL CONFIGURATION (NO BRACE)-
Pistol configuration (NO BRACE) is configured identically to the standard pistol configuration but with the brace omitted to enable users the ability to configure the system as they wish and save on cost.
-NO Pin and Weld of the muzzle device
-NO Welding of the gas block set screws
-NO Pistol brace or stock included
-Sold as a pistol
READY RIFLE SPECS & DETAILS
Muzzle Device: Gat-Lok Compatible Mil-Spec A2 Flash Hider (Pin & Weld): Simple, Proven, Significant muzzle flash reduction and moderate recoil reduction without throwing muzzle blast to your left, right or back at yourself, possibly other shooter, or downward which will disturb the surface you are supporting the rifle on while firing (IE, sand, dust, loose debris ect.) Pinned and Welded in place to meet the legal rifle length requirement of 16”
Barrel Material: 4150CMV: Mil-Spec “Machine-gun” hardened steel to resist heat and harsh use.
Barrel Profile: Light Weight Tapper Profile (625 Gas Journal,½-28 Thread Pitch): Maintains a light, handy yet durable profile with weight biased towards the rear of the barrel (towards the bore) where it is needed most and brings the rifle's center of gravity closer to the operator's dominant hand.
Barrel Finish: Magnesium Phosphate Exterior, Chrome Lined Interior, Button Rifled: Mil-spec, anti-reflective, durable exterior that retains oil and paint extremely well while maintaining a matte non-reflective finish, Chrome-Lined Bore and Chamber is the most effective way to add durability and heat resistance to a barrel as well as superior corrosion resistance.
Bore Dimensions: 223 Wylde: Safely chambering both 556 and 223 ammunition while ensuring tighter dimensions for improved accuracy with both cartridge types.
Twist Rate: 1:8 : 1:8 Twist is the ideal choice for flexibility and performance as it properly stabilizes all standard, common ammunition weights and types currently on the market from 55g to 77g and everything in between.
Gas length: Mid-Length: Proven, Reliable and industry standard for modern professional use rifles and carbines.
Gas Block: 416 Stainless Steel, Nitride Treated, Low-Profile, Cupped Set Screws: Simple, maintenance free low profile gas block with corrosion resistant and hardening nitride treatment ensuring it is ready for adverse conditions and use with cupped set screws that bore into the outer wall of the barrel slightly enhancing lockup.
Gas Tube: Mil-Spec 304 stainless steel, Melonite Treated, Mid-Length: Mil-spec Materials taken one step further with a melonite finish that adds corrosion and heat resistance while also hardening the gas tube.
Handguard: 1791 Industries 12” Full length Picatinny M-lok Handguard: The lightest, duty/professional hard use ready handguard thanks to its metal matrix compound that makes it 33% lighter than 6061T6 Aluminum while remaining equal in strength, corrosion resistance and durability. Timed to the barrel nut and with hardy anti-rotation tabs ensuring an unrivaled degree of lockup and handguard retention to the system.
Octagonal, staggered M-LOK slots, QD sockets, and a full length picatinny rail. Having some barrel exposed past the end of the handguard allows the operator to push the muzzle past cover / barriers where a full length handguard may not clear and potentially hinder/concuss and or, injure the operator with debris or muzzle blast.
Upper Receiver: Mil-spec Forged 7075 Aluminum: Industry standard, proven, non-nonsense mil spec upper receiver.
Upper Parts: Mil-spec: Simple, straightforward, mil-spec and industry standard dust cover, forward assist and other small parts, ensuring all capabilities of the upper receiver are retained without compromise.
Charging handle: Mil-spec A2, 7075 Aluminum: High quality, proper material, charging handle ensuring simple, reliable, repeatable manipulation that has been decades proven without introducing additional snag hazards on gear or equipment.
Bolt Carrier Group:HPT,MPI, C158 Steel Bolt, 8620 Steel Carrier, Chrome Lined Bolt Chamber, Staked Gas Key Screws, Magnesium Phosphate Exterior, M16 Cut (Strictly Mil-Spec):
A strict adherence to Mil-spec materials, coatings and overall build ensures the “heart” of the system is simple, reliable, durable and proven.
Lower Receiver: Mil-spec, Forged 7075: Standard for over 30 Years and standing the test of time, no-gimmicks, just a simple, rugged, foundation.
Lower Receiver parts kit: Enhanced Mil-spec: All lower parts are quality Mil-spec with the improvements of a right hand full throw left hand reduced throw ambi-safety for flexible shooting positions, and a slightly enlarged aluminum trigger guard for ease of use with gloved hands without compromising durability.
Trigger: ~6.5lbs Single Stage Mil-spec: A high quality, smooth, crisp, single stage Mil-spec trigger delivering quality, consistent performance without compromising reliability or safety.
External Buffer Assembly: Mil-spec Castle-Nut & End Plate, 7075 Aluminum Mil-spec Buffer tube: No gimmicks or unnecessary frills, simple, rugged, proven buffer assembly with quality staking, ensuring reliable function of the system and stock lockup.
Internal Buffer Assembly: H1 Reciprocating Buffer & 17-7 Flat wire Stainless Steel Buffer Spring: Refined Buffer spring reducing buffer noise when functioning while delivering improved spring service life compared to a true mil spec spring, combined with an H1 Buffer makes the system a smooth shooting, reliable, properly combat tuned/gassed platform ready for a variety of ammunition and environments.
Pistol Grip & Stock: Magpul MOE: Free of finger grooves, a proven, simple, refined pistol grip by the industry leader on firearms related polymer with internal storage cavity ready for the operators preferred rifle storage items (Oil, spare parts, tools, batteries, ect) Paired with a simple, light, quality butt-stock featuring multiple sling attachment options, protected adjustment lever, solid lockup, and a removable rubber butt pad.
-Complete Rifle/Pistol as configured
-Box and packaging supplies
-Rifle cable lock
-1x 30 round magazine where legal to include.
*No Iron sights, optics or other accessories shown on the rifle for display included.
*Link to owners manual can be found below.